Teng Tools – Teng Tools 63 Piece Wrench, Extractor, Oil Service, Mini, Snap Ring & Regular Plier Kit – TC-6T-29 – TC-6T-29

Portable CaseHard-wearing case with moulded body for strength and durability.Secure lock system with click mechanism.Divider to secure the tools in each compartment.Retractable handle for comfort and support.Rubber feet to prevent the case from sliding and scratching.Hard wearing hinge with a metal pin.Fully recyclable to protect the environment. TT1236 – 12 Piece Combination Wrench SetCombination wrenches – 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm.The 12 point ring head is set at a 15 degrees angle to facilitate use even on flat surfaces.All ring heads are equipped with the Teng Tools Hip Grip system which means the contact surface grips on the flat surfaces of the nut rather than on the corner. This helps prevent damage to the nuts and bolts and makes it possible to grip nuts and bolts which already have damaged corners.Made from high grade chrome vanadium with polished heads and a satin finish for extra grip in oily environments. TTSN11 – 11 Piece Extractor SetStud extractors – 1/2 inch drive – 6, 8, 10, 12mm.Screw extractors – 7/64in. 9/64in. 5/32in. 1/4in. 19/64in.Nut splitters – 5 to 20mm, 14 to 27mm.Heat treated High grade steel.Quick and Easy way to remove broken screws.Reversible hexagon drive 1/2 inch drive stud extractors.Nut Splitters removes frozen, corroded or rusted nuts, will not damage bolt threads.All made of high grade Chrome vanadium for extra strength. TTOS16 – 16 Piece Oil Service SetAccessories – 3in., 10in. wobble extensions, 1/2in.F:3/8in. Male T bar adaptor, 6 point 21mm socket.Spark plug sockets – 3/8 inch drive 16, 21mm.Drain plug set – 5/16in. hex x 3/8in. hex, 11mm square x 12mm hex, 17mm hex x 1/2in. hex.Drain plug set contd. – 8mm square x 3/8in. square, 13mm square x 14mm hex,8mm hex x 10mm hex.Accessories – strap type oil filter wrench,3 in 1 telescopic inspection tool.Accessories contd. – 21 piece feeler gauge set (.005 mm – 1.0 mm). TTMI16 – 16 Piece Mini Plier & Screwdriver SetScrewdrivers – Flat regular – 2.0, 2.4, 3.0.Screwdrivers – PH type – PH00, PH0, PH1.Screwdrivers – TX type – TX6, TX7, TX8, TX9, TX10, TX15.Pliers – 4 1/2in. side cutter, 4 1/2in. end cutter, 5in. long nose, 5in. flat nose.Long, tapered nose pliers with fine tips reaches into tight spaces, grips small parts, and bends wire.Cutting pliers snip copper, aluminum, brass, and soft steel wire, cable ties, and plastic parts.Self-opening, spring-loaded action reduces muscle fatigue for easy one-handed operation.Slim, nonslip grips provide fine handling and control.Screwdrivers supplied with a holder for wall mounting or free standing.Rotating handle for fast spinning.Screwdrivers made of Chrome Molybdenum. TT4747 – 4 Piece 7” Snap Ring Circlip Plier Set7 Inch Snap Ring / Circlip pliers – inner/straight (12 to 65mm capacity), inner/bent (12 to 65mm capacity).7 Inch Snap Ring Circlip pliers contd. – outer/straight (10 to 40mm capacity), outer/bent (10 to 40mm capacity).Removes and installs internally and externally placed retaining rings.Self-opening, spring-loaded action reduces muscle fatigue for easy one-handed operation.Slim, nonslip grips provide positive handling and control.Made of Chrome Vanadium. TT440 – 4 Piece Plier SetPliers – 6in. side cutter, 7in. combination, 8in. long nose, 10in. water pump.Steel Alloy and Chrome Molybdenum gives a greater cutting capacity.The cutting edges on pliers are especially angled to suit different materials and application areas.Slim design gives better accessibility.The cutting capacity is laser marked next to the cutting edge – makes it easy to see which pliers you need to choose.