Teng Tools – Teng Tools 104 Piece SAE Wrench, Socket, Tap & Die & Puller Kit – TC-6T-30 – TC-6T-30

Portable CaseHard-wearing case with moulded body for strength and durability.Secure lock system with click mechanism.Divider to secure the tools in each compartment.Retractable handle for comfort and support.Rubber feet to prevent the case from sliding and scratching.Hard wearing hinge with a metal pin.Fully recyclable to protect the environment. TT3592 – 8 Piece SAE Combination Wrench SetCombination wrenches – 5/16in. 3/8in. 7/16in. 1/2in. 9/16in. 5/8in. 11/16in. 3/4in.The 12 point ring head is set at a 15 degrees angle to facilitate use even on flat surfaces.All ring heads are equipped with the Teng Tools Hip Grip system which means the contact surface grips on the flat surfaces of the nut rather than on the corner. This helps prevent damage to the nuts and bolts and makes it possible to grip nuts and bolts which already have damaged corners.Made from high grade chrome vanadium with polished heads and a satin finish for extra grip in oily environments. TTAF32 – 32 Piece 1/4” – 3/8” Drive SAE Socket SetRegular sockets – 1/4 inch drive – 6 point – 3/16in. 7/32in. 1/4in. 9/32in. 5/16in. 11/32in. 3/8in. 7/16in. 1/2in.Deep sockets – 1/4 inch drive – 6 point – 3/16in. 7/32in. 1/4in. 9/32in. 5/16in. 11/32in. 3/8in. 7/16in. 1/2in.Regular sockets – 3/8 inch drive – 6 point – 3/8in. 7/16in. 1/2in. 9/16in. 5/8in. 11/16in. 3/4in.Deep sockets – 3/8 inch drive – 6 point – 3/8in. 7/16in. 1/2in. 9/16in. 5/8in. 11/16in. 3/4in.Made of High Grade Chrome Vanadium.Satin Finish for increased grip in oily environments.All Sockets are produced according to Teng Tools Hip Grip system which means the socket grips on the flat surfaces of the nut rather than on the corner. This helps prevent damage to the nuts and bolts and makes it possible to grip nuts and bolts which already have damaged corners.TT1215AF – 15 Piece 1/2” Drive SAE Socket SetRegular sockets – 1/2 inch drive – 12 point – 3/8in. 7/16in. 1/2in. 9/16in. 5/8in. 11/16in. 3/4in. 13/16in. 7/8in. 15/16in. 1in. 11 /16in. 11 /8in. 13 /16in. 11 /4in.Made of High Grade Chrome Vanadium.Satin Finish for increased grip in oily environments.All Sockets are produced according to Teng Tools Hip Grip system which means the socket grips on the flat surfaces of the nut rather than on the corner. This helps prevent damage to the nuts and bolts and makes it possible to grip nuts and bolts which already have damaged corners. TTTX30 – 30 Piece 3/8” Drive TX TPX TXE Socket SetAccessories – 3/8 inch drive – 3in. extension, 3/8in.F:1/4in.M adaptor.TX bit sockets – 3/8 inch drive – TX10, 15, 20, 25, 27, 30, 40, 45, 50.TPX bit sockets – 3/8 inch drive – TPX10, 15, 20, 25, 27, 30, 40, 45, 50.TX-E sockets – 1/4 inch drive – E4, E5, E6, E7, E8.TX-E sockets – 3/8 inch drive – E10, E12, E14, E16, E18.Made of High Grade Chrome Vanadium.Satin Finish for increased grip in oily environments. TTTD17 – 17 Piece Tap & Die SetMetric dies – 3mm x 0.5, 4mm x 0.7, 5mm x 0.8,6mm x 1.0, 8mm x 1.25, 10mm x 1.5,12mm x 1.75.Metric taps – 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm.Accessories – tap handle (capacity 3 to 12mm).Accessories contd. – die handle with adjustment screw (capacity 3 to 12mm).Accessories contd. – screw pitch gauge.Tap and die set is ideal for repairing screw threads. Dies, on the other hand,cut a thread on a preformed cylindrical rod, which creates a male threaded piece which functions like a bolt.Taps cut a thread on the inside surface of a hole, creating a female surface which functions like a nut.Dies cut a thread on a preformed cylindrical rod, which creates a male threaded piece which functions like a bolt.High grade steel for increased strength. TT804 – 2 Piece Combination Puller SetPuller set – combination twin/triple 6in. leg puller with 4in. capacity.Set consisting of a three legged combination puller with an extra yoke for switching to two legged pulling.With reversible legs for internal and external grip.Made from chrome vanadium.